Cleanroom environments comes with numerous challenges. When you are setting up a cleanroom facility you will need to take into account a number of factors such as the size of the cleanroom, type of cleanroom, pass through chambers, nature of the fixtures used within the cleanroom, etc. One of the most important cleanroom setup considerations are LED cleanroom lights.

Approx. 10,000 Sq.Ft. of Class 10,000 cleanroom including overhead catwalks suspended at roofline Technical specifications, design and engineering for a Two-Phase Class 10,000 cleanroom project including all mechanical, electrical, sprinklers, process piping, architectural and flooring.

Design/build Class 1000 Modular Hardwall cleanroom system with single pass, enclosed plenum design and pre-filtered return air above room walls.

When setting up cleanrooms in your facility it is important to make sure that your cleanroom will deliver the desired results. Cleanrooms are meant to provide you with a protected area that is free from contamination. There are many challenges in keeping the contamination level low because there are frequent human entries in and out of the cleanroom. Besides human entry, various stationeries and material need to be passed in and out of the cleanroom. Over a period of time the integrity of the cleanroom could come down gradually. One of the highly effective solutions to overcome this problem is the installation of specimen pass thru cabinets.

Approximately 9,500 Sq. Ft. of Design/build Class 10,000 Cleanroom with Walkable ceiling system using our diamond pattern aluminum panels and heavy duty gasketed T-bar suspended 2-tiers from building structure around existing facility piping, ductwork and equipment. Included all structural, design engineering & installation.

Today in many industrial, manufacturing and healthcare environments cleanroom installation has become a standard norm. Cleanrooms are meant to provide a controlled environment within a given space. There are several different types of cleanrooms and among them are softwall cleanroom enclosures, one of the most popular types. If you are in interested in a softwall cleanroom installation & design, here are three important factors to be taken into account.

Approximately 1,200 Sq. Ft. of Design/build Class 100/1,000/10,000 Cleanroom (Mixed Use Room). State of the Art ESD technology. 3rd Floor installation Included facility integration of all trades Included all structural, design engineering & installation.

Recently contracted design-build modular hardwall cleanroom approximately 1,800 square feet. Freestanding structure, include designs, seismic calculations, engineering and all related facility integration.

Industrial air showers for cleanroom facilities are one of the most effective approaches to fight contamination. Though there are diverse views about the effectiveness of air showers in contamination control, it is used widely in industrial environment and in healthcare industries. If you are considering air shower installation for your facility then it is important to have a clear understanding of the functionality of the entire system.

Recently completed design-build Class 10,000 walkable cleanroom ceiling system, approximately 20,000 square feet. Roof supported structure; include designs, seismic calculations, engineering, and all related facility integration.

Recently completed design-build Class 100 drum filling cleanroom with integrated raised floor and conveyor system. Floor supported structure; include designs, seismic calculations, engineering, and all related facility integration.

Our hardwall cleanroom solutions come complete with filters, lights and tiles. Optional pre-wired electrical packages are available including wall outlets and switches.

The recently completed Class 100 Modular Cleanroom system was designed to sit atop a sloped grade by lifting the modular cleanroom system onto a 6" high concrete curb around the entire perimeter. This allowed the floor drain to remain centered beneath the room below the drum filling station. Raised access flooring was put in place for the pluming/piping lines to run underneath. The high-tech conveyor line runs down the center of the custom cleanroom "flush" to the finished floor height - making it easy for transfer of the large drum barrels. The high speed cleanroom auto doors were designed with motion sensors to allow drums to move in and out without minimal personnel involvement. This room certified better than Class 100 and was on time and under budget! Next time you have a challenging application - call the cleanroom experts at CleanAir Solutions, Inc.

Before choosing equipment for your cleanroom or laboratory space, it's necessary to take the time to review the important criteria with your co-workers. Follow these five simple steps to ensure that you order the right cleanroom equipment for your next installation project.

Cleanroom engineers are now tasked to uncover more innovative products and design solutions to meet the increasingly fragile and precise nature of the newer 300-mm wafer fabrications.

Contamination control depends on reliable cleanroom filters and how they work. A malfunctioning filter can introduce contaminants into a controlled environment. Air filters need to remove impurities from the process stream but avoid transferring impurities that could wind up on a device’s or product’s surface. The filters themselves must be manufactured and packaged in a controlled environment.

SAN FRANCISCO, November 7, 2009, Cleanair Solutions, Inc. has been selected for the 2009 Best of Business Award in the Cleanroom products category by the Small Business Commerce Association (SBCA).

It took Dr. Joseph Lister a while to convince physicians that something invisible had to be protected against, but since the concept took hold, cleanliness has been a major concern in life sciences. Now there are numerous standards defining “clean” in hospitals, pharmaceutical manufacturers, biotech labs, and other life sciences areas, plus numerous cleanroom cleaning procedures for meeting those standards.

Novato's DriveSavers is recovering data from damaged computers in a newly built custom cleanroom that prevents even the slightest trace of contaminants, magnetic fields and excessive air particles from harming vulnerable components.